| Linear servo motor model Primary side (coil) |
LM-H3P2A-07P-BSS0 |
LM-H3P3A-12P- CSS0 |
LM-H3P3B-24P- CSS0 |
LM-H3P3C-36P- CSS0 |
LM-H3P3D-48P- CSS0 |
LM-H3P7A-24P- ASS0 |
LM-H3P7B-48P- ASS0 |
LM-H3P7C-72P- ASS0 |
LM-H3P7D-96P- ASS0 |
| Linear servo motor model Secondary side (magnet)LM-H3 |
S20-288-BSS0 S20-384-BSS0 S20-480-BSS0 S20-768-BSS0 |
S30-288-CSS0 S30-384-CSS0 S30-480-CSS0 S30-768-CSS0 |
S70-288-ASS0 S70-384-ASS0 S70-480-ASS0 S70-768-ASS0 |
| Cooling method |
Natural cooling |
| Thrust |
Continuous 2 [N] |
70 |
120 |
240 |
360 |
480 |
240 |
480 |
720 |
960 |
| Maximum [N] |
175 |
300 |
600 |
900 |
1200 |
600 |
1200 |
1800 |
2400 |
| Maximum speed 1 [m/s] |
3.0 |
| Magnetic attraction force [N] |
630 |
1100 |
2200 |
3300 |
4400 |
2200 |
4400 |
6600 |
8800 |
| Rated current [A] |
1.8 |
1.7 |
3.4 |
5.1 |
6.8 |
3.4 |
6.8 |
10.2 |
13.6 |
| Maximum current [A] |
5.8 |
5.0 |
9.9 |
14.9 |
19.8 |
9.6 |
19.1 |
28.6 |
38.1 |
| Recommended load to motor mass ratio |
Maximum of 35 times the mass of the linear servo motor primary side |
| Thermistor |
Built-in |
| Insulation class |
155 (F) |
| Structure |
Open (IP rating: IP00) |
| Vibration resistance |
49 m/s² |
| Mass |
Primary side (coil) [kg] |
0.9 |
1.3 |
2.3 |
3.3 |
4.3 |
2.2 |
3.9 |
5.6 |
7.3 |
| Secondary side (magnet) [kg] |
288 mm/pc: 0.7 384 mm/pc: 0.9 480 mm/pc: 1.1 768 mm/pc: 1.8 |
288 mm/pc: 1.0 384 mm/pc: 1.4 480 mm/pc: 1.7 768 mm/pc: 2.7 |
288 mm/pc: 2.8 384 mm/pc: 3.7 480 mm/pc: 4.7 768 mm/pc: 7.4 |
1. The maximum speed of the linear servo motor or the rated speed of the linear encoder, whichever is smaller, is the upper limit of the linear servo motor speed.
2. Use the linear servo motor at 70 % or less of the effective load ratio when it is in the servo lock state or in a small reciprocating motion.
| Linear servo motor model Primary side (coil) |
LM-K2P1A-01M-2SS1 |
LM-K2P1C-03M-2SS1 |
LM-K2P2A-02M-1SS1 |
LM-K2P2C-07M-1SS1 |
LM-K2P3C-14M-1SS1 |
| Linear servo motor modelLM-K2 Secondary side (magnet) 2 |
S10-288-2SS1 S10-384-2SS1 S10-480-2SS1 S10-768-2SS1 |
S20-288-1SS1 S20-384-1SS1 S20-480-1SS1 S20-768-1SS1 |
S30-288-1SS1 S30-384-1SS1 S30-480-1SS1 S30-768-1SS1 |
| Cooling method |
Natural cooling |
| Thrust |
Continuous 3 [N] |
120 |
360 |
240 |
720 |
1440 |
| Maximum [N] |
300 |
900 |
600 |
1800 |
3600 |
| Maximum speed 1 [m/s] |
2.0 |
| Magnetic attraction force 4 [N] |
0 |
| Magnetic attraction force (one side) 5 |
800 |
2400 |
1100 |
3200 |
6400 |
| Rated current [A] |
2.3 |
6.8 |
3.7 |
12 |
15 |
| Maximum current [A] |
7.6 |
23 |
13 |
39 |
47 |
| Recommended load to motor mass ratio |
Maximum of 30 times the mass of the linear servo motor primary side |
| Thermistor |
Built-in |
| Insulation class |
155 (F) |
| Structure |
Open (IP rating: IP00) |
| Vibration resistance |
49 m/s² |
| Mass |
Primary side (coil) [kg] |
2.5 |
6.5 |
4.0 |
10 |
18 |
| Secondary side (magnet) [kg] |
288 mm/pc: 1.5 384 mm/pc: 2.0 480 mm/pc: 2.5 768 mm/pc: 3.9 |
288 mm/pc: 1.9 384 mm/pc: 2.5 480 mm/pc: 3.2 768 mm/pc: 5.0 |
288 mm/pc: 5.5 384 mm/pc: 7.3 480 mm/pc: 9.2 768 mm/pc: 14.6 |
1. The maximum speed of the linear servo motor or the rated speed of the linear encoder, whichever is smaller, is the upper limit of the linear servo motor speed.
2. LM-K2 series has a structure of magnetic attraction counter-force and requires at least two blocks of identical secondary side (magnet).
3. Use the linear servo motor at 70 % or less of the effective load ratio when it is in the servo lock state or in a small reciprocating motion.
4. Magnetic attraction force is caused by assembly precision, etc.
5. Magnetic attraction force which occurs on one side of the secondary side is shown.
| Linear servo motor model Primary side (coil) |
LM-U2PAB-05M- 0SS0 |
LM-U2PAD-10M- 0SS0 |
LM-U2PAF-15M- 0SS0 |
LM-U2PBB-07M- 1SS0 |
LM-U2PBD-15M- 1SS0 |
LM-U2PBF-22M- 1SS0 |
LM-U2P2B-40M- 2SS0 |
LM-U2P2C-60M- 2SS0 |
| Linear servo motor model Secondary side (magnet) |
SA0-240-0SS0 SA0-300-0SS0 SA0-420-0SS0 |
SB0-240-1SS1 SB0-300-1SS1 SB0-420-1SS1 |
S20-300-2SS1 S20-480-2SS1 |
| Cooling method |
Natural cooling |
| Thrust |
Continuous 2 [N] |
50 |
100 |
150 |
75 |
150 |
225 |
400 |
600 |
| Maximum [N] |
150 |
300 |
450 |
225 |
450 |
675 |
1600 |
2400 |
| Maximum speed 1 [m/s] |
2.0 |
| Magnetic attraction force [N] |
0 |
| Rated current [A] |
0.9 |
1.9 |
2.7 |
1.5 |
3.0 |
4.6 |
6.6 |
9.8 |
| Maximum current [A] |
2.7 |
5.5 |
8.3 |
4.5 |
8.9 |
13.7 |
26.7 |
40.3 |
| Recommended load to motor mass ratio |
Maximum of 30 times the mass of the linear servo motor primary side |
| Thermistor |
Built-in |
| Insulation class |
155 (F) |
| Structure |
Open (IP rating: IP00) |
| Vibration resistance |
49 m/s² |
| Mass |
Primary side (coil) [kg] |
0.3 |
0.6 |
0.8 |
0.4 |
0.8 |
1.1 |
2.9 |
4.2 |
| Secondary side (magnet) [kg] |
240 mm/pc: 2.0 300 mm/pc: 2.5 420 mm/pc: 3.5 |
240 mm/pc: 2.6 300 mm/pc: 3.2 420 mm/pc: 4.5 |
300 mm/pc: 9.6 480 mm/pc: 15.3 |
1. The maximum speed of the linear servo motor or the rated speed of the linear encoder, whichever is smaller, is the upper limit of the linear servo motor speed.
2. Use the linear servo motor at 70 % or less of the effective load ratio when it is in the servo lock state or in a small reciprocating motion.
