Registrirani korisnici

Preko formulara ispod registrirani korisnici mogu pristupiti sadržaju tehničke podrške za Mitsubishi Electric, OPC Router i KEPWARE OPC Server.

Neregistrirani korisnici

Ako još niste registrirani, svoj korisnički profil možete kreirati za pristup sadržaju tehničke podrške unosom podataka u obrazac ispod.

Pri registraciji se slažete sa Politikom privatnosti.

Nadzor pozicioniranja FX3

Specifications		FX3U-1PG	FX2N-10PG	FX5-20PG-D	FX5-20PG-P
Applicable for		Base units FX3U/FX3UC/ FX5U/FX5UC	Base units FX3U/F X3UC	Base units FX5U/FX5UC
Accessible axes		1		2
Output frequency	Pulses/s	10–200 000	1–1 000 000	5 000 000	1–200 000
Signal level for digital inputs		24 V DC/40 mA	5 V DC/100 mA; 24 V DC/70 mA	5 V DC;24 V DC	24 V DC/5 mA
Power supply	5 V DC	150 mA (from base unit)	120 mA (from base unit)	—
	24 V DC	—		165 mA(external power supply)	120 mA (from base unit)
Related I/O points		8
Weight kg		0.3	0.2
Dimensions (WxHxD) mm		43x90x87		50x90x83

Order information Art. no.		259298	140113	409825	312301

Note : For the connection of a FX3U-1PG to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

Specifications		FX3U-20SSC-H
Accessible axes		2 (independent or interpolation)
Output frequency		1 Hz to 50 MHz
Pulse output format		SSCNET III (servo bus)
Communications speed		50 Mbps
Starting time	ms	1.6 (+1.7 SSCNET III cycle time)
Max. to PLC connectable modules		Up to 8 can be connected to the FX3U PLC
Status displays		Power, module status, axis status, error
Power supply	5 V DC	100 mA
Power supply	24 V DC	—
Related I/O points		8
Weight	kg	0.3
Dimensions (WxHxD)	mm	55x90x87

Order information	Art. no.	231512

Notes : The FX3U-20SSC-H can be used in combination with a FX3U or FX3UC base unit only. Please refer to the Mitsubishi Electric MELSERVO catalog for suitable servo motors and amplifiers.