Podrška korisnicima

Registrirani korisnici

Preko formulara ispod registrirani korisnici mogu pristupiti sadržaju tehničke podrške za Mitsubishi Electric, OPC Router i KEPWARE OPC Server.

Neregistrirani korisnici

Ako još niste registrirani, svoj korisnički profil možete kreirati za pristup sadržaju tehničke podrške unosom podataka u obrazac ispod.

Pri registraciji se slažete sa Politikom privatnosti.

Mrežna komunikacija FX3

Moduli za mrežnu komunikaciju FX3 Mitsubishi Electric
SpecificationsFX2N-32CCL
Module typeRemote station
Link points per stationI/O points32
Register8
Max. number of I/O points
Number of connectable modules
Power supply5 V DCMax. 130 mA (from base unit)
24 V DC50 mA
Related I/O points8
Weightkg0.3
Dimensions (WxHxD)mm43x90x87
 
Order informationArt. no.102961

Notes: To connect this module to a FX3UC or FX3GC base unit, an adapter FX2N-CNV-IF or a power supply FX3UC-1PS-5V is required. More informations about CC-Link are available in various other publications from Mitsubishi Electric.

 

SpecificationsFX3U-CAN
Module typeCANopen master
CANopen communication standardCiA 301 V4.2, CiA 302 V4.1, CiA 305 V2.2
CANopen Lift application profile modeCiA 417 V2.1
CANopen PLC device profile modeCiA 405 V2.0
Max. number of modules that can be connected to the network30 without repeater; 127 with repeater
Station numbers1–127
Supported communication speedskbps10, 20, 50, 125, 250, 500, 800, 1000
Status displaysRUN, error, power, network status
Power supply5 V DC290 mA
24 V DC
Related I/O points8
Weightkg0.2
Dimensions (WxHxD)mm43x90x88.7
 
Order informationArt. no.252845

Notes: To connect this module to a FX3UC/FX3GC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required. For the connection of a FX3U-CAN to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

 

SpecificationsFX3U-32DP
Module typeSlave station
Transmission typeBus network
Transmission dataMax. 144 bytes
Interface9-pin D-SUB for Profibus DP
Max. number of slave stations per configuration8
Communication speed5 V DCMax. 12 Mbit/s
Communication distance24 V DCMax. 1200 (depends on communication speed)
Communication cableProfibus cable with 9-pin D-SUB connector
Related I/O points8
Power supply24 V DC/145 mA (from base unit)
Weightkg0.2
Dimensions (WxHxD)mm43x90x89
 
Order informationArt. no.194214

Note: To connect a FX3U-32DP to a FX3UC/FX3GC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required.

 

SpecificationsFX3U-ENET/FX3U-ENET-P502FX5-ENET
Applicable forBase units FX3G, FX3GC, FX3GE, FX3U, FX3UCBase units FX5U, FX5UC
ProtocolTCP/IP, UDP
Communication modeFull-duplex/half-duplex
No. of simultaneous open connections8
Fixed buffer communication1023 word x 8
Communication with mail serverSMTP, POP3
InterfaceIEEE802.3u (100BaseTX), IEEE802.3 (10BaseT)
CC-Link IE Field Network BasicMaster
ConnectorRJ452xRJ45
Max. transfer rate100 Mbits/s, 10 Mbit/s
Max. segment lengthm100
CableCAT5 STP or 3 STP
Power supply5 V DC
24 V DC240 mA (from base unit)110 mA (from base unit)
Related I/O points8
Weightkg0.30.2
Dimensions (WxHxD)mm55x90x8740x90x83
 
Order informationArt. no.166086/225142409823

Note: To connect this module to a FX3UC base unit, an adapter FX2N-CNV-IF or a power supply FX3UC-1PS-5V is required .

 

SpecificationsFX3U-64DP-MFX5-DP-M
Applicable forBase units FX3U, FX3UCBase units FX5U, FX5UC
Module typeMaster station
Transmission typeBus network
Transmission data32 byte/slave (normal service mode) 244 byte/slave (extended service mode)
InterfaceProfibus DP (with 9 pole D-SUB connector)
Max. number of master per configurationMax. 1
Repeaters3
Max. number of slaves64
Communications speedProfibus standard
Communications distance mMax. 1200 (depends on communication speed)
Communication cableProfibus cable with 9-pin D-SUB connector
Power supply5 V DC
24 V DCMax. 155 mA (from base unit)150 mA (from base unit)
Related I/O points8
Weightkg0.2
Dimensions (WxHxD)mm43x90x8740x90x85.3
  
Order informationArt. no.166085409822
  
AccessoriesProfibus connector up to 12 Mbaud: PROFICON-PLUS, art. no. 140008 or PROFICON-PLUS-PG, art. no. 140009

Notes : The FX3U-64DP-M can be used in combination with a FX3U or FX3UC base unit only. To connect this module to a FX3UC base unit, an adapter ­FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required.

 

SpecificationsFX2N-64DNET
Module typeSlave (group 2)
Node typeG2 server
Station numbers0–63 points
Supported communication speedskbps125/250/500
Communication data (open connection)Master/ slaveNo. of connections1 connection (group 2)
Transfer time-out2,000 ms (ACK time-out)
UCMM client/serverNo. of connections63/63 (group 1, 3)
Data lengthMax. 64 bytes per connection
Communication data (I/O connection)TypePolling, cyclic, change of state
Data lengthMax. 64 bytes (fragmentation is possible)
Module ID codeK 7090
Status displaysPower, module status, network status
Related I/O points8
Power supply5 V DC120 mA
24 V DC50 mA
Weightkg0.2
Dimensions (WxHxD)mm43x90x87
 
Order informationArt. no.131708

 

SpecificationsFX3U-485ADP-MB
InterfaceRS485; Modbus® RS485
Communication speed*kbps0.3–19.2
Max. communication distancem500
Power supply5 V DC20 mA (from base unit)
24 V DC
Related I/O points0
Dimensions (WxHxD)mm17.6x90(106)x74
 
Order informationArt. no.206191

* The communication method and communication speed vary depending upon the communication type.

Notes : This adapter module can be connected directly (without special adapter) to a base unit of the FX3GC, FX3GE or FX3UC series. To connect this adapter module to a FX3G, FX3S or FX3U base unit, an adapter is required.

 

SpecificationsFX2N-232IF
InterfaceRS232C with 9 pole D-SUB connector (photocoupler isolation)
Communication speedkbps0.3–19.2
Communication distancemMax. 15
Communication cableShielded cable
Communication modeFull duplex
ProtocolsNon protocol mode/start stop synchronisation
Send and receive buffer512 byte each
Format7 or 8 bits, parity none/even/odd, stop bits: 1 or 2
Power supply5 V DC40 mA (from base unit)
24 V DC80 mA
Related I/O points8
Weightkg0.3
Dimensions (WxHxD)mm55x90x87
 
Order informationArt. no.66640

Note: To connect this module to a FX3UC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required.

 

SpecificationsFX3U-CAN
Module typeCANopen master
CANopen communication standardCiA 301 V4.2, CiA 302 V4.1, CiA 305 V2.2
CANopen Lift application profile modeCiA 417 V2.1
CANopen PLC device profile modeCiA 405 V2.0
Max. number of modules that can be connected to the network30 without repeater; 127 with repeater
Station numbers1–127
Supported communication speedskbps10, 20, 50, 125, 250, 500, 800, 1000
Status displaysRUN, error, power, network status
Power supply5 V DC290 mA
24 V DC
Related I/O points8
Weightkg0.2
Dimensions (WxHxD)mm43x90x88.7
 
Order informationArt. no.252845

Notes: To connect this module to a FX3UC/FX3GC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required. For the connection of a FX3U-CAN to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

 

SpecificationsFX3U-ENET-ADP
ProtocolTCP/IP
No. of simultaneous open connections1
InterfaceIEEE802.3u (100BaseTX), IEEE802.3 (10BaseT)
ConnectorRJ45 (to Ethernet), 3 screw terminals (to ground)
Max. transfer rate10 Mbit/s, 100 Mbit/s
CableCAT5 STP or 3 STP
Power supply5 V DC30 mA (from base unit)
24 V DC
Related I/O points0
Weightkg0.1
Dimensions (WxHxD)mm23x90(106)x81.5
 
Order informationArt. no.248844

Notes : This module can be connected directly (without adapter) to a base unit of the FX3GC or FX3UC series. To connect this module to a FX3G, FX3S or FX3U base unit, an adapter is required.

 

SpecificationsFX2N-32DP-IF-D
Power supply24 V DC (+20 %/-30 %)
Power consumption14 W
Internal current consumption5 V DC/max. 220 mA (from base unit)
Interface (connectors)9-pin D-SUB for Profibus DP, 8-pin Mini-DIN for PC or programming unit FX-10P/FX-20P/FX-30P
Communicationspeed1200 mkbps9.6/19.2/45.45/93.75
1000 mkbps187.5
400 mkbps500
200 mkbps1500
100 mkbps3000/6000/12000
Communication distancemMax. 1200 (depends on communication speed)
Communication cableProfibus cable with 9-pin D-SUB connector
Max. number of controllable I/O points256
Weightkg0.4
Dimensions (WxHxD)mm75x98x87
 
Order informationArt. no.142763

 

 

Poštovani! Dana 7.3.2024 naša tvrtka promijenila je ime u RBT Technologies d.o.o. (prethodno INEA CR).