Mrežni komunikacijski moduli FX5

Specifications		FX3U-16CCL-M ¹	FX5-CCL-MS
Applicable for		Base units FX3G, FX3GC, FX3GE, FX3U, FX3UC, FX5U, FX5UC	Base units FX5U, FX5UC
Module type		Master station	Master/Intelligent device station
Link points per station	I/O points	32
	Register	8
Max. number of I/O points		FX3G/FX3GC/FX3GE: 32 x nbr. of stations ≤128 FX3U/FX3UC: 32 x nbr. of stations ≤256 ²	768
Number of connectable modules		Max. 16	Max. 24
Power supply	5 V DC	—
	24 V DC	240 mA	100 mA
Related I/O points		8
Weight	kg	0.4	0.3
Dimensions (WxHxD)	mm	55x90x87	50x90x83

Order information	Art. no.	248224	312299

To connect these modules to a FX3UC or FX3GC base unit, an adapter FX2N-CNV-IF or a power supply FX3UC-1PS-5V is required.More informations about CC-Link are available in various other publications from Mitsubishi Electric.
Total of I/O points in base unit and extension units within the CC-Link network ≤384.Notes: Please refer to manual for slave functionality.For the connection of a FX3U-16CCL-M to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

Specifications		FX3U-64CCL
Module type		Intelligent device station
Link points per station	I/O points	128 (Occupying 1 station with octuple expanded cyclic setting)
Link points per station	Register	32 (Occupying 1 station with octuple expanded cyclic setting)
Max. transmission speed		10 Mbps
Related I/O points		8
Power supply	24 V DC	24 V DC/220 mA
Weight	kg	0.3
Dimensions (WxHxD)	mm	55x90x87

Order information	Art. no.	217915

Notes : When attaching the FX3U-64CCL to a FX3UC/FX3GC base unit, the FX2NC-CNV-IF interface converter or the FX3UC-1PS-5V power supply unit is required. More informations about CC-Link are available in various other publications from Mitsubishi Electric. For the connection of a FX3U-64CC to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

Specifications		FX5-CCLIEF
Station type		Intelligent device station
Communication speed		1 Gbps
Max. number of I/O points	RX	384 points, 48 bytes
	RY	384 points, 48 bytes
	RWr	1024 points, 2048 bytes ¹
	RWw	1024 points, 2048 bytes ¹
Power supply	5 V DC	10 mA
Power supply	24 V DC	230 mA (external power supply)
Related I/O points		8
Weight	kg	0.3
Dimensions (WxHxD)	mm	50x90x103

Order information	Art. no.	297444

256 points (512 bytes) when the master station is in high-speed mode.

Specifications		FX5-ASL-M
Module type		AnyWireASLINK system master module
Max. number of I/O points		384
Number of connectable modules		128
Power supply	5 V DC	200 mA
Power supply	24 V DC	100 mA
Related I/O points		8
Weight	kg	0.2
Dimensions (WxHxD)	mm	40x90x83 (97.3 with connector)

Order information	Art. no.	312300

Specifications		FX5-485ADP
Transmission standard		Conforming to RS485 and RS422 standards
Communication speed*	bps	300/600/1200/2400/4800/9600/19200/38400/57600/115200
Max. communication distance	m	1200 m
External device connection method		Terminal block
Power supply	5 V DC	20 mA (from base unit)
Power supply	24 V DC	30 mA (from base unit)
Related I/O points		0
Weight kg		0.08
Dimensions (WxHxD)	mm	17.6x106x74

Order information	Art. no.	280514

* The communication method and communication speed vary depending upon the communication type.

Specifications		FX5-232ADP
Transmission standard		Conforming to RS232C standard
Communication speed*	bps	300/600/1200/2400/4800/9600/19200/38400/57600/115200
Max. transmission distance		15 m
External device connection method		9 pole D-SUB connector (male)
Power supply	5 V DC	30 mA (from base unit)
Power supply	24 V DC	30 mA (from base unit)
Related I/O points		0
Weight	kg	0.08
Dimensions (WxHxD)	mm	17.6x106x74

Order information	Art. no.	280513

* The communication method and communication speed vary depending upon the communication type.

Mrežni modul za Profibus DP

Specifications		FX5-DP-M
Applicable for		Base units FX5U, FX5UC
Module type		Master station
Transmission type		Bus network
Transmission data		32 byte/slave (normal service mode) 244 byte/slave (extended service mode)
Interface		Profibus DP (with 9 pole D-SUB connector)
Max. number of master per configuration		Max. 1
Repeaters		3
Max. number of slaves		64
Communications speed		Profibus standard
Communications distance m		Max. 1200 (depends on communication speed)
Communication cable		Profibus cable with 9-pin D-SUB connector
Power supply	5 V DC	—
	24 V DC	150 mA (from base unit)
Related I/O points		8
Weight	kg	0.2
Dimensions (WxHxD)	mm	40x90x85.3

Order information	Art. no.	409822

Accessories		Profibus connector up to 12 Mbaud: PROFICON-PLUS, art. no. 140008 or PROFICON-PLUS-PG, art. no. 140009

Ethernet mrežni modul

Specifications		FX5-ENET
Applicable for		Base units FX5U, FX5UC
Protocol		TCP/IP, UDP
Communication mode		Full-duplex/half-duplex
No. of simultaneous open connections		8
Fixed buffer communication		1023 word x 8
Communication with mail server		SMTP, POP3
Interface		IEEE802.3u (100BaseTX), IEEE802.3 (10BaseT)
CC-Link IE Field Network Basic		Master
Connector		2xRJ45
Max. transfer rate		100 Mbits/s, 10 Mbit/s
Max. segment length	m	100
Cable		CAT5 STP or 3 STP
Power supply	5 V DC	—
	24 V DC	110 mA (from base unit)
Related I/O points		8
Weight	kg	0.2
Dimensions (WxHxD)	mm	40x90x83

Order information	Art. no.	409823

Note: To connect this module to a FX3UC base unit, an adapter FX2N-CNV-IF or a power supply FX3UC-1PS-5V is required.

Mrežni modul za EtherNet/IP

Specifications		FX5-ENET/IP EtherNet/IP communications	FX5-ENET/IP Ethernet communications
Number of ports		2 ¹
Number of connectable units		1 module
Applicable engineering tool		GX Works3: Ver. 1.050C or later, EtherNet/IP Configuration Tool for FX5-ENET/IP: Ver. 1.00A or later
Protocol type		—	Socket communication
Number of connections		32 ²	Total of 32 connections ³
Transmission specification	Communication mode	Full-duplex	Full-duplex/half-duplex
	Max. segment lengthm	100 ⁴
Connection cable ⁵		100BASE-TX	100BASE-TX, 10BASE-T
Power supply	5 V DC	—
	24 V DC	110 mA (from base unit)
Related I/O points		8
Weight	kg	0.2
Dimensions (WxHxD)	mm	40x90x83

Order information	Art. no.	409824

Since the IP address is shared by two ports, only one address can be set.
The total number of connections for Class 3 communications and UCMM communications is 32.
Up to 32 external devices can access one FX5-ENET/IP module at the same time.
For maximum segment length (length between hubs), consult the manufacturer of the hub used.
A straight/cross cable can be used.

Mrežni modul za CANopen

Specifications		FX3U-CAN
Module type		CANopen master
CANopen communication standard		CiA 301 V4.2, CiA 302 V4.1, CiA 305 V2.2
CANopen Lift application profile mode		CiA 417 V2.1
CANopen PLC device profile mode		CiA 405 V2.0
Max. number of modules that can be connected to the network		30 without repeater; 127 with repeater
Station numbers		1–127
Supported communication speeds	kbps	10, 20, 50, 125, 250, 500, 800, 1000
Status displays		RUN, Error, Power, Network status
Power supply	5 V DC	290 mA
	24 V DC	—
Related I/O points		8
Weight	kg	0.2
Dimensions (WxHxD)	mm	43x90x88.7

Order information	Art. no.	252845

Notes: To connect this module to a FX3UC/FX3GC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required. For the connection of a FX3U-CAN to a FX5U/FX5UC base unit, a bus conversion module FX5-CNV-BUSC resp. FX5-CNV-BUS is required.

Mrežni modul za SAE J1939

Specifications	FX3U-J1939
Communication standard version	SAE J1939
Network node size	SAE J1939: 2–30
Communication method	Cyclic, acyclic or request driven (user configurable)
CAN layer-2 communication	Send and receive
Max. cable length m	5000
Baud rates kbit/s	10, 20, 50, 100, 125, 250, 500, 800, 1000
Power supply	24 V DC/110 mA (from base unit)
Weight kg	0.2
Dimensions (WxHxD) mm	43x90x95

Order information Art. no.	254276

Note: To connect this module to a FX3UC base unit, an adapter FX2NC-CNV-IF or a power supply FX3UC-1PS-5V is required.

Adapteri

Specifications		FX5-232-BD	FX5-485-BD	FX5-422-BD-GOT
Applicable for		Base units FX5U	Base units FX5U	Base units FX5U
Interface		RS232C with 9 pole D-SUB connector	RS485	RS422 with 8 pole mini DIN connector
Power supply		5 V DC/20 mA (from base unit)	5 V DC/20 mA (from base unit)	5 V DC/20 mA (from base unit)
Related I/O points		—	—	—
Weight	kg	0.02	0.02	0.02
Dimensions (WxHxD)	mm	38x51.4x18.2	38x51.4x30.5	38x51.4x15.4

Order information	Art. no.	280511	280512	280515

RBT Technologies - Oprema za automatizaciju i digitalizaciju d.o.o.

info@rbt-technologies.hr

Ako ste zainteresirani za više informacija o našim proizvodima i rješenjima, možete nas kontaktirati putem info@rbt-technologies.hr ili preko formulara ispod.